Hydraulic skid loader type breaker for rock break

Aside from making sure the oil supply hoses are tight at all times, make sure no fasteners are missing and get a look at the hydraulic hammer’s top tie rod nuts. These four hold the hoe ram together and if one gets loose, it can cause the alignment of the backhead, cylinder, and tool holder/chuck housing to shift, which can cause the metal to metal contact inside the hydraulic breaker.  On side plated hydraulic hammers with cross bolts, torque should be checked with a slam wrench on a regular basis and marked with a paint pen after they are tightened so that it is easier to notice if they are loosening up.  Performing these checks on a daily basis does not require much effort, and allows you to catch minor problems before they require downtime at a local hydraulic hammer shop.  As with everything that touches dirt or rock, a conscientious operator that is trained on what to watch for is your best asset to preserve your demolition and excavation equipment.High-quality high performance Hydraulic hammers breaker is our hot selling product, if you want to buy it, please send us a message.