You are here: Home » News » Precautions for using hydraulic breaker

Precautions for using hydraulic breaker

Publish Time: 2021-10-12     Origin: Site

Routine Inspection

●Check that hydraulic oil is clean and there is an adequate quantity. If dirty,replace the oil.If insufficient,add oil.

●Warm the excavator for about 10 minutes. Warm the hydraulic oil,too.

●Check that hose connections are secure and nuts and bolts are fully tightened. Retighten if loose.

●Grease the hydraulic breaker using a grease gun.



Check Points

●Is the stop valve fully open?

●Are the hoses steady? (No abnormal vibration)

●Is there sufficient hydraulic oil?

Is the hydraulic oil clean?

●Is the working pressure normal?(Check with gauge.)

●Is the oil temperature normal?(Check the cooler fins for clogging.)

●Is the filter element clean?



Notes

● Do not use the hydraulic breaker In water.

(Modifications are required for use In water.)

● When removing the hydraulic breaker,prevent mud or foreign matter from adhering to the hose or cap.

● Periodically replace the hydraulic oil and the filter element.

● Remove the chisel when transporting the hydraulic breaker.


* For details, please refer to the Instruction Manual.



We have been focused on the research, manufacture and sales of top level hydraulic breaker and spare parts with more than ten years experience. 

Get In Touch

Get In Touch

Copyright 2021 © Yantai Chengli Precision Machinery Co.,Ltd. All Rights Reserved. Technical Support Leadong Sitemap    鲁ICP备18009418号-2 atmbreaker.com