Slience skid loader type breaker for Excavator

When breaking oversize material the breaker is expected to break the material down the middle into two pieces. This is optimum production. If the operator has to re-position the breaker towards the edge of the rock and gradually downsize the material, production rate slows down. To assess what size of breaker will effectively handle this application, the size and hardness of the material must be known. If a 4 cubic yard piece of hard rock (20,000 psi or greater) needs to be broken in half you will require a 7,500-ft. lb. or larger breaker. If a 2 cubic yard piece of limestone (20,000 psi or less) needs to be broken in half you will require a 3,000 – 5,000-ft. lb. breaker.If you are interested in the cost-effective and efficient Hydraulic hammers breaker, please contact us.